Non-Chipping-Cutting
In the non-chipping cutting process, the tubes are precisely straightened from the coil via our straightening lines, fed into the machine, orbitally cut and torn off. Depending on your requirements the tube ends can be delivered brush deburred or chamfered.
| Outer diameter | 4 – 12 mm | |
| Wall thickness | 0.3 – 1.5 mm | |
| Length | 10 – 6,000 mm | |
| Length tolerance | from +/- 0.05 mm | depending on end machining |
| Material | Steel, stainless steel, copper, aluminium, … |
